Kerbl IPCam Pet Mode D'emploi page 25

Camera setup and configuration
1. Connecting the camera to the network
When using for the first time, please connect the camera
and the computer to a router using network cables.
Ensure the router is switched on. Only use the cable
supplied to provide power to the camera so as to avoid
damaging the device!
The camera can be returned to the factory settings
by pressing the „Reset" button (for at least 10 seconds).
The "Reset" button is located on the swivel head on the
opposite side of the lens.
2. Connect the camera with an Android /
iOS device (smartphone, tablet, etc.)
2.1 Software download
The software needed (Eye Cloud) can be downloaded via
the AppStore/Google Play or via the website:
www.kerbl.com/service/downloads/ip-camera-apps
2.2 Registration
Register as detailed in the instructions contained in the
application with your e-mail address and password
25