Attaching The Side Covers; Attaching The Control Panel Cover - Sony HR Trinitron PVM-20M7MDE Mode D'emploi

Preparation

Attaching the Side Covers

1
Side covers
2

Attaching the Control Panel Cover

1
2
Control panel cover
16
Tabs on the upper edge
Arrows
Tabs on the
bottom edge
Panel hinges
Boss
In order to protect the ventilation holes from splashes
from medicines, etc., attach the supplied side covers as
illustrated.
1
Hook the tabs on the upper edge into the
ventilation holes, making sure that the arrows on
the cover are facing down.
Note
Attach the side covers on all ventilation holes.
2
Push up the tabs on the bottom edge and fit the
cover into the lowest ventilation holes.
Attach covers on both left and right vents.
In order to protect the control buttons on the front
panel from inadvertent operation, attach the supplied
control panel cover.
1
Attach the panel hinges to the left and right grips
from the inner side.
2
Fit the bosses on both sides of the control panel
cover into the lower holes on the panel hinges,
bending the control panel cover a little.