Medela Invia Motion Mode D'emploi page 23

7. Remove the new Canister/Tubing Set from the
packaging and attach it to the Invia Motion NPWT
Pump by pressing the canister to the pump and
rotating to the right.
8. Connect the Invia Motion Tubing Connector to the
wound drain tubing.
9. Switch the Invia Motion NPWT Pump on by pressing
the
10. Discard the used Canister/Tubing Set according to
instructions provided by your healthcare professional.
200_4169_ifu_invia_motion_patient_EN_ES_FR.indd 23
minimum
button. Slide the pump into the carrying case.
maximum
23
17/02/15 12:07