Operational Screens (Of Non-Monitored Version) - BWT BEWADES blue Instructions De Montage Et D'utilisation

EN
Remote Alarm
Module Check
A further display screen is showing which "specific modules" were initialized.
The controller then displays the "UV lamp optimization" screen for 60 seconds to allow the lamp to reach
its optimum output. Finally, a final "start-up complete" screen is displayed. The system will now be ready
to disinfect water flow.
all detected modules
8.3

Operational screens (of non-monitored version)

On units without the UV-sensor monitoring, the default screen shows the BWT Home Screen (No.1).
At any point during operation the user is able to scroll through the BWT Home Screen (No.1), Lamp
life remaining (No.2), QR Code (No.3), Contact Info (No.4) and Maintenance Parts (No.5) screens by
pressing the button located on the front of the controller.
18
lamp reaching max. output
OR
successful start-up