Symbols Used; How Safety Instructions Are Displayed - BWT BEWADES blue Instructions De Montage Et D'utilisation

If there is a risk of frost, drain all components that
convey water.
Lift or transport the product or its components only
from the designated suspension eyes or attachment
points, if present.
The product must be installed or mounted on a suffi-
ciently strong and level horizontal surface and must
be adequately secured against falling or tipping.
1.5

Symbols used

This symbol indicates general
hazards for people, machines or
the environment.
This symbol indicates hazards
due to electric shocks from live
components.
This symbol indicates hazards for
the eyes and skin due to ultravi-
olet rays.
This symbol indicates that this
electrical and electronic equip-
ment must not be disposed of
with household waste at the end
of its life.
This symbol indicates that the
product can be recycled at the
end of its life.
This symbol instructs you to dis-
connect the unit's power supply.
It ensures your safety and pro-
tects you from injury.
Here: Main switch off (0).
This symbol instructs you to use
your personal protective equip-
ment (PPE).
It ensures your safety and pro-
tects you from injury.
Here: Wear protective goggles.
1.6 How safety instructions are dis-
played
In this document safety instructions precede any
sequence of actions that could cause harm to per-
sons or damage to property. All hazard prevention
measures must be followed.
Safety instructions are displayed as follows:
SIGNAL WORD!
Source of hazard
(e.g. electric shock)
Type of hazard (e.g. risk of fatal
injury)!
► Escape or prevent hazard
► Rescue measure (optional)
Signal word / colour
Warning symbol
Source / type of
hazard
Consequences of
hazard
Hazard prevention
measure
Indicates the severity
of the hazard
Calls attention to the
hazard
Indicates the type
and the source of the
hazard
Explains the conse-
quences of not fol-
lowing the safety in-
structions
Explains how to avoid
the hazard
5
EN