Linea 2000 Domo DO924DV Mode D'emploi page 65

s unplugged and empty.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
slip during the door reversing process.
oor
s unplugged and empty.
d must be saved to do the reinstallation of the door.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
it flat as this may damage the coolant system.
slip during the door reversing process.
2 people handle the unit during assembly.
oor
1. Odšroubujte 2 šrouby z horní strany krytu.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
d must be saved to do the reinstallation of the door.
it flat as this may damage the coolant system.
s unplugged and empty.
2 people handle the unit during assembly.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
slip during the door reversing process.
ews at rear side of top cover.
s unplugged and empty. d must be saved to do the reinstallation of the door.
it flat as this may damage the coolant system.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
2 people handle the unit during assembly.
slip during the door reversing process.
ews at rear side of top cover.
d must be saved to do the reinstallation of the door.
it flat as this may damage the coolant system.
2 people handle the unit during assembly.
ews at rear side of top cover.
ews at rear side of top cover.
2. Z mrazáku odšroubujte horní kryt i s kontrolkou teploty.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
ge and then remove door and place it on a soft pad to
ge and then remove door and place it on a soft pad to
3. Odšroubujte šroubky, které drží horní pant dveří. Dveře nadzvedněte a položte je na
měkký povrch, tak aby se nepoškrábaly.
ge and then remove door and place it on a soft pad to
ge and then remove door and place it on a soft pad to
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
4. Odšroubujte spodní šroubky pantu, sundejte závěs pantu i nastavitelnou přední nožku.
hinge. Then remove the adjustable feet from both
www.domo-elektro.be
7
7
7
7
unscrew
unscrew
unscrew
unscrew
65
DO924DV