Linea 2000 Domo DO924DV Mode D'emploi page 55

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
hinge. Then remove the adjustable feet from both
Reverse Door
5.
Suelte el pasador de la bisagra de la abrazadera de la bisagra. De la vuelta a la abrazadera
y vuelva a fijar el pasador.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
oor
move the bottom hinge pin, turn the bracket over and replace it.
oor
Unscrew
move the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
6.
Fije los tornillos, el soporte de la bisagra y la pata de ajuste en el otro lado de la parte
feet.
inferior. Apriete ligeramente.
Unscrew
fitting the bottom hinge pin. Replace both adjustable
7. Place the door back on. Ensure the door is aligned horizontally and
fitting the bottom hinge pin. Replace both adjustable
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
7.
Coloque la puerta en su lugar con cuidado. Asegúrese de que la puerta está alineada
ack on. Ensure the door is aligned horizontally and
tanto horizontal como verticalmente, de manera que las juntas estén cerradas por todos
t the seals are closed on all sides before finally
p hinge.
los lados antes de unir completamente la bisagra superior. Vuelva a colocar la bisagra y
atornille en la parte superior del aparato.
8. Put the top cover and fix it with 2 screws on the back.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
p hinge.
r and fix it with 2 screws on the back.
9. Fix the thermostat knob.
8.
Vuelva a colocar la cubierta superior y fíjela con ayuda de los tornillos.
r and fix it with 2 screws on the back.
www.domo-elektro.be
at knob.
7
Unscrew
Screw
Screw
screw
screw
Screw
screw
DO924DV
55

Publicité

Table des Matières
loading

Table des Matières