Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Reverse Door
5.
Take the hinge pin out of the hinge bracket. Turn the bracket around and tighten the pin
again.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
oor
move the bottom hinge pin, turn the bracket over and replace it.
oor
oor
move the bottom hinge pin, turn the bracket over and replace it.
Unscrew
move the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
6.
Attach the screws, hinge bracket and adjustable foot to the opposite side of the bottom.
feet.
Loosely secure.
Unscrew
fitting the bottom hinge pin. Replace both adjustable
Unscrew
fitting the bottom hinge pin. Replace both adjustable
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
fitting the bottom hinge pin. Replace both adjustable
7.
Carefully set the door back into place. Ensure the door is aligned horizontally and
ack on. Ensure the door is aligned horizontally and
vertically so that the seals are closed on all sides before finally tightening the top hinge.
t the seals are closed on all sides before finally
p hinge.
Insert the hinge back and screw it to the top of the appliance.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
8. Put the top cover and fix it with 2 screws on the back.
p hinge.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
p hinge.
r and fix it with 2 screws on the back.
8.
Put the top cover back and fix it in place with the screws.
r and fix it with 2 screws on the back.
9. Fix the thermostat knob.
r and fix it with 2 screws on the back.
at knob.
at knob.
at knob.
44
DO924DV
Unscrew
8
8
Screw
Screw
Screw
screw
screw
screw
8
Screw
screw
Publicité
Table des Matières
