Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Table of Contents
1.
Machine overview
(standard delivery).................... 16
2.
Please read first!....................... 17
3.
Safety ......................................... 17
3.1 Specified conditions of use ......... 17
3.2 General safety instructions ......... 17
3.3 Symbols on the machine ............ 18
3.4 Safety devices ............................ 18
4.
Special product features.......... 19
5.
Transportation .......................... 19
6.
Operating elements .................. 19
7.
Initial operation ......................... 21
7.1 Mains connection........................ 21
8.
Operation................................... 21
8.1 Table saw mode ......................... 22
8.2 Operation as radial pull saw ....... 22
8.3 Operation as mitre saw............... 22
8.4 Set-in work.................................. 23
9.
Care and maintenance ............. 23
9.1 Saw blade change ...................... 23
9.2 Riving knife setting...................... 24
9.3 Universal fence adjustment ........ 24
9.4 Scale adjustment ........................ 25
9.5 Rotating table adjustment ........... 25
of the blade return action. ........... 25
lubrication ................................... 25
9.8 Machine storage ......................... 25
9.9 Maintenance ............................... 25
10. Trouble Shooting ...................... 26
11. Repairs....................................... 26
12. Available accessories ......... 26/54
13. Environmental Protection ........ 26
14. Technical specifications .......... 26
14.1 Available saw blades .................. 27
2. Please read first!
These instructions have been written in
a way which facilitates learning of how to
operate your saw safely. Here is a guide
on how you should read these instruc-
tions:
Read these instructions completely
before use. Pay special attention to
the safety information.
These instructions are intended for
persons having a basic technical
knowledge of the operation of
machines
such
as
described herein. If you have no
experience whatsoever, we strongly
recommend to seek the advise of an
experienced person.
Keep all documents supplied with
this machine for future reference.
Retain proof of purchase in case of
warranty claims.
If you lend or sell this machine be
sure to have all machine documents
go with it.
The equipment manufacturer is not
liable for any damage resulting from
neglect of these operating instruc-
tions.
Information in these instructions is
denoted as under:
Numbers in illustrations (1, 2, 3, ...)
denote component parts;
are consecutively numbered;
relate
number(s) in brackets (1), (2), (3)
... in the neighbouring text.
Instructions to be carried out in a
certain sequence are numbered.
Instructions which can be carried
out in any sequence are indicated
by a bullet (•).
Listings are indicated by an En Dash
(-).
3. Safety
3.1
Specified conditions of
use
This machine is intended to rip and
crosscut grown timber, faced boards,
chip board and wood-core plywood
sheets, and similar wood-derived materi-
als.
Do not cut round stock without suitable
the
one
jigs or fixtures. The rotating saw blade
could turn the workpiece.
When sawing thin stock layed on edge,
a suitable guide must be used for firm
support.
Danger!
Risk of personal injury or
environmental damage.
Risk of electric shock!
Risk of personal injury
by electric shock.
Drawing-in/trapping haz-
ard!
Risk of personal injury
by body parts or clothing
being caught.
Caution!
Risk of material damage.
Note:
Additional information.
to
the
corresponding
ENGLISH
A
Danger!
Any other use is not as speci-
fied.
Use not as specified, alteration of the
saw or use of parts that are not
approved by the equipment manufac-
turer, can cause unforeseeable damage!
3.2
General safety instruc-
tions
When using this tool observe the fol-
lowing
safety
instructions,
exclude the risk of personal injury or
material damage.
Please also observe the special
safety instructions in the respective
chapters;
where applicable, follow the legal
directives or regulations for the pre-
vention of accidents pertaining to
the use of circular saws.
A
General hazards!
Keep your work area tidy - a messy
work area invites accidents.
Be alert. Know what you are doing.
Set out to work with reason. Do not
operate the tool while under the
influence of drugs, alcohol or medi-
cation.
Consider environmental conditions:
Keep work area well lighted.
Prevent adverse body positions.
Ensure firm footing and keep your
balance at all times.
When working long stock use suita-
ble supports.
Do not operate the tool near inflam-
mable liquids or gases.
This tool shall only be started and
operated by persons familiar with
circular saws, and who are at any
time aware of the dangers associ-
ated with the operation of such tool.
Persons under 18 years of age shall
use this tool only in the course of
their vocational training, under the
supervision of an instructor.
Keep bystanders, particularly chil-
dren, out of the danger zone. Do not
permit other persons to touch the
tool or power cable while it is run-
ning.
Do not overload tool - use it only
within the performance range it was
designed for (see "Technical specifi-
cations").
B
Danger! Risk of electric shock!
Do not expose tool to rain.
Do not operate tool in damp or wet
environment.
Prevent body contact with earthed
objects such as radiators, pipes,
to
17
Publicité
Chapitres
Table des Matières
