Troubleshooting - Brandt TI2005 Manuel D'instruction

3.2 Troubleshooting

Here are the recommended inspections of common failures:
Do not disassemble the unit by yourself to avoid any dangers or damage to the induction
cooker.
Problems
After the plug in the socket, the indicator
(1) and the screen do not light up.
The button (1) lights up but heating does
not start.
Heating stops suddenly during operation.
E3, E6
Failure
codes
E7, E8
E1, E2, E4, E5, EB
Points to check
- Make sure that the plug is inserted
tightly. - Make sure that the switch, socket,
fuse and power line are in good condition.
- Make sure that the containers are suitable
for induction cooker.
- Sent it to service facility to repair
- Let the appliance cool down
- Let air entry and air vent free
- Set again the timing
- Refer to failure codes
After a moment, temperature inside the
cooker returns to normal. The unit can restore
its work once the « on/off » button is pressed.
After adjusting the voltage, the unit restores
its work.
Send it to service facility to repair.
24