Melitta Cremio Mode D'emploi page 8

6.Troubleshooting
Problem
The appliance does
not turn on.
GB
The appliance stops
prematurely, the
indicator light flashes
blue.
The milk does not
froth or hardly froths.
Milk froth is
overflowing out
of the top of the
appliance.
The appliance makes
a loud noise when
in use.
7. Notes on disposal
• Appliances labelled with this symbol
to European guidelines for WEEE (Waste Electrical
and Electronic Equipment).
• Electric appliances do not go in the household bin.
Dispose of the appliance in an environmentally
friendly way using suitable collection systems.
• Packaging materials are raw materials and can be
recycled. Please recycle them.
10
Cause
The power cable is not plugged
in.
In between use the appliance
needs to cool down.
The container is empty or is not
filled to the min. level.
The appliance is overheated.
There are burnt milk deposits
on the base of the container.
The container is not filled to the
min. level, the attachment does
not come into contact with the
milk.
The maximum filling level for
frothed milk is exceeded.
You have selected the 'warm
milk' feature.
The whisk is missing or the lid is
not properly closed.
The milk you are using is not
suitable for making frothed milk.
The appliance is overfilled.
Milk is a natural product and
the amount of frothed milk it
produces can vary.
The lid is not properly fitted on
the appliance.
are subject
Solution
Plug in the power cable.
Wait for one minute and then start the appliance
again.
Rinse out the appliance and let it cool down.
Fill up until min. mark.
Fill the container no higher than the max. level for
frothed milk.
Rinse the appliance and allow it to cool. Restart the
appliance by pressing the left button briefly (< 2 sec.)
Then it should light up red.
Fit the attachment to the whisk and close the lid
properly. The lid must be flush with the appliance.
Choose milk with a protein content of at least 3 g
per 100 g (you can find this information on the back
of the milk carton).
Disconnect the plug. Let the appliance
cool down and then clean it.
Reduce the fill quantity.
Fit the lid so that it is flush with the appliance.