Cleaning And Maintenance - Melitta Cremio Mode D'emploi

Masquer les pouces Voir aussi pour Cremio:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
overflow if the max. filling level is exceeded.
• Fit the lid so that it is flush with the appliance .
• Place the milk frother on its base.
• Now start the appliance:
1.Warm milk froth: Press the left button (
(< 2 Sec.). It will light up red. The appliance starts .
2.Cold milk froth: Press and hold the left button (
(> 2 Sec.). It will light up blue. The appliance starts .
3.Warm milk: Press the right button (
up red. The appliance starts .
• Keep the lid closed during preparation. To interrupt
the appliance, lift the milk frother from its base or
press the illuminated button again.
• When milk preparation is completed the motor
stops and the indicator light in the button goes off.
The appliance turns off automatically.
• Use the button to raise the lid.
• Pour or spoon the frothed milk carefully out of the
container .
• Never use metal or sharp objects to remove the frothed
milk as this can damage the non-stick coating.
• Allow the milk frother to cool for at least 1 minute
before using again.
Tip: With the Cremio you can also prepare warm
cocoa. First put the required amount of milk in the
container. Now add the amount of cocoa powder you
would like. For best results, gently stir in the cocoa
powder by hand with the whisk attached to the lid.
Then place the lid flush on the appliance. Press the
button on the right to start making your drink. Once
your drink is ready the motor stops and the appliance
turns itself off. Remove the lid and pour the cocoa
into a cup.

4. Cleaning and maintenance

• Before cleaning always remove the appliance from
the power source.
• Allow the milk frother to cool down completely
before cleaning.
• Clean the milk frother after each use. Cleaning is
easier if you clean the appliances inmediately after use.
• Never clean the container or base in the dishwasher
or under running water.
• Clean the outside of the appliance and the base with
a soft, damp cloth.
• Clean the inside of the milk frother with standard
washing up liquid and a soft, damp cloth to avoid
damaging the non-stick coating .
• Clean the lid and the whisk in the dishwasher or by
rinsing and wiping with a damp cloth. If necessary
remove the seal on the lid.
• Do not use harsh or abrasive cleaning agents.
• In the case of persistent soiling please use the Melitta
PERFECT CLEAN ESPRESSO MACHINES Milk
System Cleaning Liquid (Fill 25 ml of the Milk System
Cleaning Liquid into the appliance and add water up
to 250 ml). Let the mixture of water and Melitta
PERFECT CLEAN ESPRESSO MACHINES Milk
System Cleaning Liquid act upon for a few moments.
Afterwards remove persistent soiling with a smooth
cloth or sponge.
5. Tips for the best results
• Use refrigerated milk to prepare your milk froth (7-8 °C).
• You can use all kinds of standard milk variants (independent
of fat level). Even soy or lactose free milk can be
frothed perfectly with Melitta
content is relevant for an excellent milk froth result.
The higher the proportion the more stable and fine
pored the result.
• Choose milk with a protein content of at least 3 g
) briefly
per 100 g (you can find this information on the back
of the milk carton).
)
). It will light
®
®
Cremio
. The protein
®
®
 GB
9

Publicité

Table des Matières
loading

Table des Matières