VERITAS Florence Mode D'emploi page 67

1
1
10. Lower the presser foot lifter.
11. Pull down the lever to the very bottom.
When heard a "click" sound, it will be
on the right position to do the needle
threading and the hook pin passes
through the needle eye.
①
Lever
2
②
Hook pin
③
Needle
3
12. Pass the thread around the thread guide.
Take the thread in front of the needle and
make sure it is under the hook pin.
①
Thread guide
②
Hook pin
2
13. To cut the excess thread, take thread end
and gently slip it over the thread cutter
1
located on the right of the needle.
①
Thread cutter
14. Raise the lever, the hook will rotate and
pass the thread through the needle eye to
form a loop.
Pull the thread through the needle eye to
finish threading.
Your machine is threaded and ready for
sewing, follow the instructions on "Starting
to sew" chapter to start sewing.
61 61
Note
EN