Battery Replacement - TFA Kuchen-Chef Mode D'emploi

TFA_No. 14.1510_Anleitung 05.10.2017
Küchen-Chef – Digital BBQ meat thermometer
• Should water or steam enter the device's jack, it could affect the contact with the probe. Dry the probe connector with a
cloth before connecting it to your instrument.
• Turn off the instrument after use.
• Remove the batteries if the device will not be used for an extended period of time.
• Keep the device in a dry place.

8.1 Battery replacement

• Change the batteries when the device functions become weak.
• Open the battery compartment and insert two new AAA 1.5 V batteries, polarity as illustrated.
• Close the battery compartment again.
9. Troubleshooting
Problem Solution
➜ Press the ON/OFF button to switch on the instrument
No display
➜ Ensure the batteries' polarity are correct
➜ Change the batteries
➜ Change the batteries
Incorrect indication
➜ Check the contact between plug and socket, dry it if necessary
20
11:07 Uhr Seite 11
Küchen-Chef – Digital BBQ meat thermometer
Temperature display "- - -°C" ➜ Plug in the sensor cable
➜ Check the contact between plug and socket
➜ Temperature is outside measuring range
Temperature display is too high ➜ Check the position of the probe in the meat
If your device fails to work despite these measures, contact the retailer where you purchased the product.
10. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries with ordinary household waste.
As a consumer, you are required by law to take them to your retail store or to an appropriate collection site
depending on national or local regulations in order to protect the environment.
The symbols for the contained heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive
(WEEE).
Please do not dispose of this product in ordinary household waste. As a consumer, you are required to take
end-of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in
order to ensure environmentally-compatible disposal.
21