Battery Replacement - TFA FUN 30.3068.01 Mode D'emploi

TFA_No. 30.3068_Anleitung
FUN – Wireless thermometer
• Make sure to avoid the vicinity of any source of interference
such as computer screens, TV sets or solid metal objects.
• When placed outdoors, choose a shady and dry place for the
transmitter. Direct sunlight may trigger incorrect measurement
and continuous humidity damages the electronic components
needlessly.
• Once the desired location is chosen, check whether the trans-
mission from the transmitter to the base station is possible
(transmission range of up to 100m in open areas). Within solid
walls, especially ones with metal parts, the transmission range
can be reduced considerably.
• If necessary choose another position for the transmitter and/or
base station.
• The transmitter can be wall mounted (mounting hole at the back).
9. Additional transmitters (Cat.Nr.: 30.3243.02) optionally
available
• For having more than one transmitter, select different channels
for each sensor with the 1 2 3 switch inside the battery compart-
ment. Insert two new AA 1,5 V batteries, polarity as illustrated.
• Start the base station operation or the manual search for the
outdoor transmitter:
• Choose the respective transmitter by pressing the CH button.
• Press and hold the CH button on the base station for two se-
conds. The last registered transmitter (channel) will be canceled
and the transmitter search begins.
• The outdoor values and the channel number will be shown on
the base station display. If you have installed more than one out-
door transmitter, press the CH button on the base station to
change between the channels 1 to 3.
• After the last registered channel a circle symbol will appear for
alternating channel.
20
14.08.2019 11:21 Uhr Seite 11
FUN – Wireless thermometer
10. Care and maintenance
• Clean the devices with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the batteries if you do not use the devices for a long
period of time.
• Store the devices in a dry place.

10.1 Battery replacement

• Change the batteries of the outdoor transmitter, when the bat-
tery symbol appears on the display of the outdoor temperature.
• Change the base station batteries, when the battery symbol
appears on the display of the indoor temperature.
• Please note: When the batteries are changed, the contact
between the transmitter and the base station must be restored –
so always insert new batteries into both devices or start a manu-
al transmitter search.
11. Troubleshooting
Problem Solution
➜ Ensure the batteries' polarities are
No indication
on the base station
➜ Change the batteries
No transmitter reception ➜ No outdoor transmitter is installed
➜ Check the outdoor transmitter's
Display "---"
➜ Restart the outdoor transmitter and
➜ Manual search for the transmitter
correct
batteries (do not use rechargeable
batteries!)
the base station according to the
manual
(according to the manual)
21