Pause Î Stop Î Go Home - Bosch BCR1 Série Mode D'emploi

Cleaning programmes and operating modes
13
14
1x
CornerClean
For intensive cleaning of the edges and corners of a
room.
ProAnimal*/PowerPlus*
On a digital map, select individual rooms that should be
cleaned twice.
Pause Î Stop Î Go Home
13
Fig. "Go Home/Pause" button
You can pause, stop or send the robot vacuum back to
where it started at any time by pressing the "Go Home/
Pause" button on the robot vacuum.
Pausing the cleaning programme
14
Fig.
Press the "Go Home/Pause" button while a cleaning
programme is in progress.
The robot vacuum will stop and pause the active
cleaning programme.
The "Go Home/Pause" button and the button for the
active cleaning programme will flash in the colour of
the selected cleaning mode.
Press the relevant programme button again to unpau-
se the robot vacuum and resume the cleaning pro-
gramme.
Information
If you pause the robot vacuum by pressing the "Go
Home/Pause" button, for your own safety – or if you do
not want to resume cleaning via the app – you should
either deactivate your wireless network or switch the
appliance off completely using the toggle switch.
* Depending on model
en
81