Care And Maintenance; Maintenance And Cleaning - Microson CIMA FRONT BTE Manuel De L'utilisateur

CARE AND MAINTENANCE
INFORMATION
• Clean your ear moulds regularly, using specially
designed wipe. (Ask your hearing care specialist).
• Regular use of a dehumidifier is recommended
to keep your hearing aids in optimum working
conditions. (Ask your hearing care specialist).
• Always have a spare battery available.
• It is advisable to replace the tube connecting the
mould and the hearing aid once it starts to turn yellow
or becomes rigid.
ATTENTION!
• Do not clean your hearing aids with alcohol,
hydrogen peroxide or detergents: use a soft, moist
cloth.
• Do not immerse your hearing aids in liquid!
Do not wash your hearing aids! Keep them
dry and protected from humidity or damp.
MOULDS
Cerumen (ear wax) in the custom made moulds
affects sound quality.
Clean the custom made moulds immediately after
removing the hearing aids with a soft cloth.
No other tools required.
EN
34
MAINTENANCE AND CLEANING
DAILY
Cleaning the sound output of the mould. (Fig. 1)
Cleaning the microphone filter / wind shield. (Fig. 2)
Dehumidifying treatment. (Consult your hearing care specialist)
WEEKLY
Cleaning the exterior of the hearing aid (housing, earhook,
screws). (Fig. 3)
Cleaning the exterior of the mould. (Fig. 4)
Desobstruya el conducto de ventilación del molde. (Fig. 5)
Cleaning the interior of the battery compartment. (Fig. 6)
Fig. 1 Fig. 2
Fig. 4 Fig. 5
35
Fig. 3
Fig. 6
EN