Changing The Adapter (Thin Tube); Maintenance And Care; Environmental Operating Conditions - Microson M-34 DIGITAL BTE AGC Manuel De L'utilisateur

cHanging tHe adapter (tHin tuBe)
INSERTING THE ADAPTER:
Hold the tube firmly and push the
adapter downwards.
Make sure that the adapter is com-
pletely attached to the tube.
EXTRACTING THE ADAPTER:
Hold the tube firmly and pull the
adapter upwards until the two parts
become separated.
en
24
maintenance and care
INFORMATION
- Clean the moulds frequently using a special
towelette. We recommend using MICROCLEAN (ask
your hearing care specialist).
- Ask for MICRODRY to prevent the damaging effects
of moisture.
- Always have a spare battery to hand.
ATTENTION!
- Never clean your hearing aids with alcohol, peroxide
or detergents. Use a soft, damp cloth.
Do not get your hearing aids wet!
TIPS / ADAPTERS
Cerumen (ear wax) in the tips / adapters or moulds
affects sound quality.
Clean the tips / adapters or moulds immediately after
removing the receiver with a soft cloth. No other
tools are required.
environmental operating conditions
For optimum operation we recommend using your
hearing aids within a range of 0 / 40 ˚C (degrees
Celsius). Likewise, the relative humidity during
storage should not exceed 95%.
25
en