Programs Push Button; Audio Input - Microson CIMA FRONT BTE Manuel De L'utilisateur

PROGRAMS PUSH BUTTON
Your hearing aid comes with a push button that permits
the selection of an appropriate program.
As you press the push button, you will
hear tones indicating the program you
are using.
Each program will permit you to better
adapt to different environments or
situations of everyday life.
Follow the instructions of your audio
prosthetist to get the most out of your
hearing aid.
Your hearing aid complies with the IEC 60118-13 standard regarding electromagnetic
compatibility.
AUDIO INPUT
Your hearing aid has a built-in audio input jack. This
allows you to connect your hearing aid to other audio
equipment with FM system, television or various audio
equipment. It transmits the source sound
your hearing aid, which keeps the signal clear and free
of external interference.
Only use the Audio Shoe designed specifically for the
hearing aid.
WARNING!
Risk of injury by electrical shock!
Connect the audio input only to devices that comply
with IEC 60065 (IEC standard for audio, video and other
electronic devices).
1
Your hearing aid complies with the IEC 60118-6 norm, which guarantees its compatibility
with external electrical and electro-acoustical signal.
EN
Example: Two tones for program 2.
directly to
1
30
INSERTION
1. Open the battery door until to
the first position, lift the top of the
connector and close the battery
holder again.
2. Place the audio shoe on top, line
up the jack contacts with those that
are now visible on the hearing aid.
3. Push the audio shoe downward
until it couples with the hearing aid.
REMOVAL
1. Hold the device with one hand
and the shoe with the other.
2. Pull the shoe outwards until it
separates from the hearing aid.
3. Close the connector top, hiding
the contacts below it.
31
AUDIO SHOE
EN