Replacing An Oven Light; To Replace A Light Bulb - Haier HCW3460AES Guide De L'utilisateur

2. Move the hinge brackets back down into position.
3. Close and open the door slowly to assure that it is correctly and securely in place.

REPLACING AN OVEN LIGHT

Make sure the oven and lights are cool and power to the oven has been
turned off before replacing the light bulb(s).
The lenses must be in place when using the oven. The lenses serve to
protect the light bulb from breaking.
The lenses are made of glass. Handle carefully to avoid breakage.
Failure to do so could result in death, electric shock, cuts or burns.
•
Oven is equipped with two or three halogen lights located in the side walls of the
oven.
•
The lights are switched on when the door is opened or when the oven is in a
cooking cycle.
•
The oven lights are not illuminated during Self-Cleaning.
•
Each light assembly consists of a removable lens, a light bulb as well as a light
socket housing that is fixed in place.
•
Light bulb replacement is considered to be a routine maintenance item.

TO REPLACE A LIGHT BULB

Halogen bulb type: 120 V, 25 W (G9).
1. Make sure oven is turned off and cool.
2. Disconnect power at the main power supply (fuse or breaker box).
3. Open the snap-on lens by carefully inserting the tip of a screwdriver under
the metal holder of the lens next to a screw head. Refer to the graphic for
the location to insert the screwdriver tip and a direction to move the driver.
Unscrewing the screw is not necessary.
32
WARNING
Electrical Shock Hazard