Installing The Appliance - CONSTRUCTA CC4P91562 Manuel D'utilisation Et Notice D'installation

en Installation instructions
15.5 Installation dimensions in the tall
unit
Observe the installation dimensions and the safety
clearances in a tall unit.
15.6 Preparing the tall unit
Determine the wall thickness of the unit.
1.
An x-value is assigned to the wall thickness.
Note: The x-value corresponds to the distance
2.
between the lower edge of the connection plate and
the bottom of the fitted unit.
Screw the connection plate tightly to the tall unit.
When doing so, observe the x-value that was de-
termined.
15.7 Installing the appliance
Secure the spacers to the appliance in accordance
1.
with the wall thickness.
40
2. Note:
Do not trap or kink the power cable.
Insert the appliance into the unit and move it to the
right.
Screw the appliance in until the appliance is cent-
3.
rally aligned.
Check the clearance to the adjacent appliances.
4.
The clearance to the adjacent appliances must be
at least 3 mm.
Remove any packaging material and adhesive film
5.
from the cooking compartment and the door.
=
=