Electrical Installstion - AYA AF71BP Manuel D'utilisation

The oven has a light with the following characteristics:
25 W, 300 ℃.
1. During use the appliance becomes hot. Care should be taken to avoid
touching heating elements inside the oven
2. WARNING: Ensure that the appliance is switched off before replacing
the lamp to avoid the possibility of electric shock
3. Remove the glass cover that protects the light bulb by turning it anti-
clockwise.
4. Unscrew the old light bulb and dispose of it safely and ecologically.
Note:
The glass cover may be tight and, therefore, may need a grip to release it.
BULB and
BULB PROTECTOR
ELECTRICAL INSTALLATION
The installation must be carried out by a suitably qualified
person, in accordance with the current version of the
following.
Before connecting the appliance, make sure that the supply
voltage marked on the Rating Plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
Our company shall not be held responsible for any damage caused by

using the appliance without an earthed socket. Risk of electric shock,
EN-42