AYA AF71BP Manuel D'utilisation page 76

Function icon instruction
Icon
Top outer heat element
Heating fan (Defrost)
PROGRAM AND PRODUCTION FUNCTIONS
1. Power on
Connect your appliance to the mains supply, all indicator lights of the
display board will light up for 1second and then enter the clock setting state.
Default time show 12:00, hour "12" flashes, the system clock setting icon " "
flashes, and the system clock icon " " is always on. The clock can be input
at this time, refer to clock setting requirement for details.
After 10 seconds without any operation and the oven will enter to

adjust minute automatically.
Within 10 seconds without any operation when adjusting minute, the

oven will enter standby mode automatically.
Under the standby mode, the display always shows system time.(Refer

to picture 3 for the display effect.)
When the oven is powered on, the oven door lock will start to self-inspection.
During the self-inspection, the door lock will run back and forth
automatically. If there is no abnormal alarm within 20 seconds, then self-
inspection is completed. Or if it shows fault code "E-3" during the self-
inspection, please refer to protection function for problem analysis, you can
touch " " to cancel the fault code and return to standby mode.
Function
Pic 3: Initial standby mode
Icon
Top inner heat element
EN-22
Function
Bottom heat element