Electrical Installstion - AYA AFE70XBL Manuel D'utilisation

4. Unscrew the old light bulb and dispose of it safely and ecologically.
Note:
The glass cover may be tight and, therefore, may need a grip to release it.
BULB and
BULB PROTECTOR
ELECTRICAL INSTALLATION
The installation must be carried out by a suitably qualified
person, in accordance with the current version of the following.
Before connecting the appliance, make sure that the supply
voltage marked on the Rating Plate corresponds with your
mains supply voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
This appliance should be wired into a 13 A double pole switched fused
o
spur outlet, having 3 mm contact separation and placed in an easily
accessible position adjacent to the appliance. The spur outlet must still
be accessible even when your oven is located in its housing to enable the
appliance to be disconnected from the mains supply.
To connect the oven power cord, loosen and remove the cover on the
o
terminal block, in order to gain access to the contacts inside. Make the
connection, securing the cord in place with the cable clamp provided
and then immediately close the terminal block cover again.
EN-28