AYA AF71BP Manuel D'utilisation page 77

2. Time setting
In the standby mode, touching the " " button once to enter the system
clock setting state. At this time, the hour value of the clock and the setting
icon " " flash (1s/1 time) and the hour is set by rotating the switch KB2.
(0~23~0 is recyclable)
Pic 4: Hour and minute adjustment display effect
After adjusting the hours, re-touch " " to switch to minute adjustment.

Minute value and the setting icon " " flash at this time, you can set
minute time by rotating programming switch KB2.(0~59~0 recyclable)
After adjusting the minutes, re-touch the " " to confirm, clock setting

accomplished. And at this time, the clock setting icon " " goes out
and the second icon "："flashes (1s/1 time).
When the hour and minute are set, the system clock setting icon " "

flashes and the system clock icon " " is always on. After confirming,
the setting icon " " is off and the system clock icon " " continues to
be displayed. In the hour setting, if you do not touch the " " button to
confirm within 10 seconds, it will automatically switch to the minute
setting. If the " " button is not confirmed within 10 seconds after the
clock setting is completed, the system defaults to complete the clock
setting and automatically returns to the standby state. If the clock is not
set within 20 seconds after power-on, the system default clock is 12:00
and enters standby state. If the power is turned off, the clock will be
reset.
In the standby state, only the system clock is displayed.

3. The choices of function
Under standby status, switch different functions by rotating the

programming switch KB1 in turn, refer to picture 5 for the order. (Non-
recyclable, oven function will remember the last operation)
Pic 5: Oven function mode
EN-23