Electrical Installstion - AYA AFB55X Manuel D'utilisation

Note:
The glass cover may be tight and, therefore, may need a grip to release it.
BULB and
BULB PROTECTOR
ELECTRICAL INSTALLATION
The installation must be carried out by a suitably qualified
person, in accordance with the current version of the
following.
Before connecting the appliance, make sure that the supply
voltage marked on the Rating Plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
This appliance should be wired into a 13 A double pole switched
o
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. The spur
outlet must still be accessible even when your oven is located in its
housing to enable the appliance to be disconnected from the
mains supply.
EN-30