Factory Reset - Key B Organ Viscount Legend Expander Mode D'emploi

2.
Legend Exp
Switch on the
display and all the LEDs on the panel will blink four times, after which the display will show the message
"Blk " for a short while.
3.
While holding down the [STORE] button, press:
- [EQ] to transmit the GLOBAL and MIDI parameters (except TUNING, TRANSPOSE, SPLIT POINT
UPPER / LOWER and LOWER OCTAVE). At the end of the transmission, the LEDs of the [PEDALS],
[PERCUSSION] and [MODEL] buttons will flash once.
- [1] on the MEMORY section to transmit the contents of all Memories. At the end of the transmission the
LEDs of the Memory buttons will flash once.
- [1] on the PRESETS section to transmit the contents of all Presets. At the end of the transmission the
LEDs of the Presets buttons will flash once.
4.
Save the acquired data on the external device.
To reload this data on the instrument, connect the output of the external device to the [MIDI IN1], [MIDI
IN2/PEDALS] or [USB TO HOST] connector of

8.3 FACTORY RESET

Use this function to reset all the internal parameters of the instrument, Memories, Presets and any parameter
that has been modified with
had when it was purchased. To do so, switch on the instrument while pressing the [PEDALS], [PERCUSSION]
and [MODEL] buttons. The display shows the message "ExP " and all the LEDs on the panel flash four times,
after which the message "F-s" will appear for a short while and the instrument restarts with the following
settings:
- REVERB TYPE: HALL
- REVERB PRE ROTARY: POST
- DRIVE TYPE: CLASSIC
- ROTARY SLOW – FAST : SLOW
- ROTARY TYPE: CLASSIC
- ROTARY DIRECT: OFF
- ROTARY MEMPHIS STYLE: OFF
- PEDALS TO LOWER: OFF
- PEDALS DIRECT: OFF
- PEDALS SUSTAIN: 0
- PEDALS SPLIT POINT: C3
- PERCUSSION ON/OFF: ON
- PERCUSSION SOFT/NORMAL: SOFT
- PERCUSSION SLOW/FAST: FAST
- PERCUSSION 2nd/3rd: 3rd
- PERCUSSION VOLUME: 64
- PERCUSSION DECAY: 64
- MODEL TYPE: '70
- MODEL CROSSTALK: 64
- MODEL KEYCLICK: 64
- EQ BASS: 0
NB
When a factory reset is performed, all changes made by the user will be irreparably lost.
while pressing the [ROTARY] button. The message "ExP" will appear on the
Legend Exp
Legend Editor
to their factory values, i.e. the standard values that the instrument
- EQ MIDDLE: 0
- EQ TREBLE: 0
- DRAWBARS: UPPER
- PRESETS: NO
- VIBRATO/CHORUS UPPER: OFF
- VIBRATO/CHORUS LOWER: OFF
- GLOBAL TUNING: 0
- GLOBAL TRANSPOSE: 0
- GLOBAL TONE CONTROL: 127
- GLOBAL LOCK DRAWBARS: OFF
- GLOBAL LOCK CONTROLS: OFF
- GLOBAL ROTARY PEDAL MODE: SWITCH
- GLOBAL EXPRESSION PED. TYPE: DIRECT
- GLOBAL EXPRESSION PED. MIN.: NORMAL
- MIDI MODE: MIDI MODE 2
- MIDI CHANNEL UPPER: 1
- MIDI CHANNEL LOWER: 2
- MIDI CHANNEL PEDAL: 3
- MIDI SPLIT POINT UPPER/LOWER: C3
- MIDI LOWER OCTAVE: OFF
- MIDI THRU: OFF
EN - 25
and send the data to the instrument.
User Manual