Settings; Choosing Desired Standard - Hexagon TESA RUGOSURF 90G Mode D'emploi

TESA-Rugosurf 90 G
The extent of the probe displacement within the measuring range is assessed through the function This options
allows the probe position to be adapted to suit desired measurement.
d
As soon as the relevant parameters are set, press the key to start the procedure, and then get the results once the
procedure is completed.

10 SETTINGS

To access this submenu, press System Settings

10.1 Choosing desired standard

To access this menu option, press Standard
Select desired standard before pressing and get back to the menu Settings.
Note
Selecting ISO Standard 12085 with active inch unit system causes the gauge unit to display a message telling you that
this standard requires the metric unit system for the needed calculation; the unit then switches over to that one,
automatically.
9