Switching Nominal/Actual Temperature (S-A); Comfort And Reduced Temperature ( ) - REV MAX! Mode D'emploi

17. Switching nominal/actual temperature (S-A)

In the factory settings, the display will show the nominal
temperature. In the configuration menu, you can change
the display setting from nominal to acutal temperature.
• Open the configuration menu by pressing the
menu button.
• Select the (S-A) menu item with the (+) and (-) but-
tons and confirm with the OK button.
• Now set the format you want to show on the display
(„SEt" for the nominal temperature and „ACt" for
the actual temperature) with the (+) and (-) buttons.
• Confirm setting with the OK button.
If the actual temperature is selected,
the display will disbplay „SEt" for 5
seconds on change of the nominal
temperature (or on change of mode).
Afterwards, the display automatically
changes back to actual temperature.
18. Comfort and reduced temperature (
The comfort ( ) and reduced ( ) temperature buttons
make switching between comfort and reduced temperature
simple and user friendly. The factory setting for the comfort
temperature is 21.0°C and the reduced temperature 17.0°C.
These can be changed permanently as follows:
• Press the comfort ( ) / reduced ( ) temperature
button for a few seconds.
• The display shows the respective symbol and the
corresponding comfort or reduced temperature.
• Change the temperature with the (+) and (-) buttons.
40
)