Setting Week Programmes (Pro) - REV MAX! Mode D'emploi

13. Setting the week programmes (Pro)
In the week programme, for each
weekday up to 6 heating phases (13
change settings) can be set separa-
tely. The programming is carried out
for the days chosen, whereby tempe-
rature settings have to be set for the entire period between
00:00 and 23:59.
• Press the Mode button for more than 3 seconds.
The display will show "Pro".
• Confirm the setting with the OK button. The display
will show "dAy".
• Select an individual weekday, all weekdays, the
weekend or the entire week with the (+) and (-) but-
tons (i.e. weekdays).
• Confirm setting with the OK button.
• Now set the end time of the first time period (i.e.
6:00 am for the period 0:00 – 6:00 am).
• Confirm setting with the OK button.
• With the (+) and (-) buttons select the chosen tem-
perature for the previously chosen time period
(i.e. 17.0°C).
• Confirm setting with the OK button.
• Repeat this procedure until temperatures are stored
for the entire period between 0:00 and 23:59.
In Auto mode the selected week programme will be automa-
tically adopted by all taught-in MAX! Radiator Thermostats.
In Auto mode the temperature can be changed at any
time with the (+) and (-) buttons or comfort ( ) and redu-
ced temperature ( ) buttons. The adjusted temperature
37