Display Content During Normal Operation; Switching Time/Day (T-D) Display - REV MAX! Mode D'emploi

Monday - Sunday:
from 00:00 to 06:00 15.0°C
from 06:00 to 09:00 23.0°C
from 09:00 to 12:00 17.0°C
from 12:00 to 14:00 19.0°C
from 14:00 to 18:00 17.0°C
from 18:00 to 22:00 21.0°C
from 22:00 to 23:59 15.0°C

15. Display content during normal operation

week programme are displayed for each time interval for
which the nominal temperature is above the reduced tem-
perature. An example can be found in sec. 12.

16. Switching time/day (t-d) display

The factory setting will show the time on the display. In the
menu the display can be switched to the date.
• Open the configuration menu by pressing the menu
button for more than 3 seconds.
• Select the "t-d" menu item with the (+) and (-) but-
tons and confirm with the OK button.
• Now set the format you want to show on the display
(date and time will switch on the display) with the
(+) and (-) buttons.
• Confirm setting with the OK button.
During normal operation, the opera-
ting mode, weekday, nominal tem-
perature, time, radio synchronicity
and switching periods are displayed.
The bars for switching periods of the
39