Teaching-Out Of Wireless Components (Unl); Operating Modes (Auto / Manu / ) - REV MAX! Mode D'emploi

As soon as the MAX! Wall Thermostat has been
taught in on a gateway like the MAX! Cube, all data
such as date, time or week programme are transmit-
ted to it via the radio connection.

10. Teaching-out of wireless components (UnL)

Components that are taught-in to the MAX! Wall Thermos-
tat can be taught-out with the function unlearn „UnL". There-
by, all wireless components are taught-out at the same time.
• Press the Mode button for more than 3 seconds.
• Select the "UnL" menu item with the (+) and (-) but-
tons. Confirm the setting with the OK button.
• "ACC" will show on the display. Confirm with the
OK button.
11. Operating modes (Auto / Manu /
You can switch between the following 3 operating modes
with a short press on the Mode button:
Holiday function (
should be held until a fixed end time.
Manu: Manual operation – the temperature is set manu-
ally with the (+) and (-) buttons.
Auto: Week programme – automatic temperature control
according to stored week programme.
If the operating mode or the temperature on one device in
the room is changed, all taught-in radiator thermostats will
adjust to this setting.
): Setting a temperature that
)
35