Product Description; Intended Use - pullman Ermator S 13 Manuel D'utilisation

Introduction................................................................... 15
Safety............................................................................18
Assembly...................................................................... 19
Operation...................................................................... 20
Maintenance................................................................. 22

Product description

The product is a single phase dust extractor. Dust-laden
air goes through the suction hose into the inlet valve.
The product separates the dust particles from the air.
The particles falls into the plastic bag at the bottom of
the product.
Product overview S 13
2
1
4
5
6
7
1. Pre-filter
2. Jet Pulse Handle
3. HEPA filter
4. Hose lock
948 - 003 -
Contents
Troubleshooting............................................................ 23
Transportation, storage and disposal........................... 24
Technical data.............................................................. 24
EC Declaration of Conformity....................................... 26
Introduction

Intended use

This machine is designed for vacuuming and separating
dry, non-combustible dust with an explosion limit value
of >0.1mg/m
This machine is intended for commercial use, for
example in hotels, schools, hospitals, factories, shops,
offices and rental businesses.
3
5. Inlet plug
6. Longopac connection
7. Longopac holder
8. Manometer
3
. Do not use the product for other tasks.
11
10
8
9
1
0
Auto
15