Table Des Matières; Introduction; Product Description; Intended Use - pullman Ermator W 70 P Manuel D'utilisation

Introduction..................................................................... 2
Safety..............................................................................4
Assembly........................................................................ 5
Operation........................................................................ 6
Maintenance................................................................... 7

Product description

The Pullman Ermator Wet industrial vaccum cleaner is a
slurry collector. The liquids are sucked through the inlet
valve at high speed via the suction hose. The liquid is
collected in a container. The pump variants offer the
possibility to evacuate the liquid via the evacuation
pump.
On variants without the evacuation pump the liquid can
be drained by the evacuation valve.
A floating device protect the motor from liquid.
The W 70 and W 70 P have an extra filter to filter the
slurry foam from particles.
Product overview W 70 P
18
1. On/off switch for the motor
2. On/off switch for the pump
2
Contents

Introduction

1
0 0
1 1
14
8
3
15
4
16
9
Troubleshooting.............................................................. 8
Transportation, storage and disposal............................. 9
Technical data.............................................................. 10
EC Declaration of Conformity....................................... 11
To protect the product and prolong the lifetime it is
always recommended to use bags to collect and filter
the largest particles.

Intended use

The product is intended for domestic and commercial
use to vacuum and collect liquid none explosive,
flammable or combustible.
The W 70 and W 70 P can be used for dry applications
temporarily. Dry bags should then always be used and
the filter should be changed to a Hepa filter, sold as an
accessory.
2
5
3. Float
4. Inlet valve
10
11
6
17
12
7
13
915 - 002 - 02.04.2019