3
4
5
1
3
6
30 mm
3.8 ft-lb/17 Nm
2
English
Make sure that the adapters are level.
Install the escutcheons.
Position the valve over the s-unions.
Secure the valve to the adapters by rotating the nuts
clockwise.
Install the handshower check valve and washer.
Install the handshower and hose (not included).
Reset the high temperature limit stop, if desired.
Justify the thermostatic mixer handle.
13261xx1 only: Reset the Ecostop, if desired.
Note: Because handshowers in the US are flow re-
stricted to 2.5 GPM or less, the effect of the Ecostop
will not be noticible.