Alarm Functions; Home Connect - Gaggenau RB 280 Notice D'utilisation

Alarm functions

Door alarm
A warning signal is switched on if the appliance door
is left open for a while. Close the door to switch off
the warning signal.
Temperature alarm
The temperature alarm switches on if the freezer
compartment is too warm and the frozen food is at risk
of thawing.
When the alarm button 5 is pressed, the temperature
display freezer compartment 4 indicates for five
seconds the warmest temperature reached in the
freezer compartment.
Then this value is deleted. The temperature display
freezer compartment 4 indicates the set freezer
compartment temperature without flashing.
From this time on the warmest temperature is
recalculated and saved.
The alarm may switch on without any risk to the
frozen food:
▯
when the appliance is first switched on,
▯
when large quantities of fresh food are placed in
the appliance,
▯
if the freezer compartment door is open too long.
Note:
Do not refreeze partly or completely thawed food.
Only food that has then been cooked (boiled or fried)
may be refrozen.
No longer store the frozen produce for the max.
storage period.
Switching off the alarm
Press the alarm button 5 to switch off the warning
signal.

Home Connect

This appliance is Wi-Fi-capable and can be controlled
remotely using a mobile device.
Note:
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
In the following cases, the appliance functions like a
refrigerator without a network connection and can still be
operated manually via the controls:
▯
The appliance is not connected to a home
network.
▯
The availability of the Home Connect function
depends on the availability of Home Connect
services in your country. Home Connect services
are not available in every country. You can find
more information on www.home-connect.com.
Note:
▯
Please observe the safety information in these
operating instructions and ensure that they are
still observed if you operate the appliance using
the Home Connect app and are not at home when
doing so.
You must also follow the instructions in the Home
Connect app.
▯
If the appliance is being operated by means of the
controls on the appliance itself, this mode of
operation always has priority. During this time, it
is not possible to operate the appliance using the
Home Connect app.
Setting up Home Connect
Note:
▯
Observe the Home Connect supplementary
sheet, which is available for download under
www.gaggenau.com with the instructions. To do
so, enter the E-number of your appliance in the
search field.
▯
After switching on the appliance, wait at least two
minutes until internal device initialization is
complete. Only then start setting up Home
Connect.
▯
To implement settings with Home Connect, you
have to install the Home Connect app on your
mobile device. Observe the supplied Home
Connect documents with regard to this. Follow
the steps specified by the app to implement the
settings.
▯
The Home Connect menu will close automatically
when the appliance is not operated for a lengthy
period of time. You can find information on how to
open the Home Connect menu at the start of the
appropriate chapter.
11