Service And Maintenance - Festool ETS EC 150/3 A EQ Guide D'utilisation

Sanding work
– Sanding solid wood and veneered edges
– Sanding rebate of windows and doors
– Intermediate sanding of paintwork at edg-
es
– Light sanding of natural wood windows
using nonwoven pad
– Smoothing wooden surfaces using non-
woven pad before staining
– Rubbing or removing excess limestone
residue using nonwoven pad
– Intermediate sanding of paintwork on
stained surfaces
– Cleaning natural wood window rebate us-
ing nonwoven pad
– Sanding stained edges
– Sanding of thermoplastics
WARNING
Any maintenance or repair work that requires
opening of the motor or gear housing should only
be carried out by an authorised Customer Service
Centre (name supplied by your dealer)!

Maintenance or repair work carried out by an
unauthorised person can lead to the wrong con-
nection of the power cord or other components,
which in turn can lead to accidents with serious
consequences.
WARNING
To prevent accidents, always remove the plug
from the power supply socket before carrying out
any maintenance or repair work on the tool!

Do not use compressed air to clean the electrical
tool! Do not try to clean parts inside the tool in
this way, as you could let foreign objects in
through the openings of the tool housing.
Adjusting
wheel set-
ting
3 - 4
2 - 3
1 - 2

Service and maintenance

EKAT
1
To ensure constant air circulation, always keep the
cooling air openings in the motor housing clean and
free of blockages.
In the event of a slowdown in performance or in-
creased vibrations, blow and clean cooling air
openings.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festoolusa.com/ser-
vice
4 Use only original Festool spare parts!
Order No. at: www.festoolusa.com/
5
3
2
service
13