General Characteristics - Cembre B70M-P24 Notice D'utilisation Et Entretien

ENGLISH

1. GENERAL CHARACTERISTICS

PUMP TYPE:
Max operating pressure
Oil supply
Weight with battery
Degree of protection:
Motor
Operating temperature
Battery:
Battery charger supply
Oil reservoir capacity
Recommended oil:
Recommended oil for "KV"versions:
Dimensions:LxWxH
Safety: the pump is fi tted with a maximum pressure valve
upon request (see pag. 42) to check the proper setting of the press
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent A
at the work place L
pA
– The maximum value of the weighted acoustic displacement pressure C
at the work place L
pCPeak
– The acoustic power level emitted by the machine L
is equal to .................................................................................................................................................................... 74,5 dB (A)
WARNING:
Hydraulic pumps manufactured by Cembre S.p.A. are developed for use with crimping
or cutting heads. According to this specifi c use, they do not need and are not equipped
with an oil non-return safety system.
For this reason, use in applications diff erent from those intended (for example with hy-
draulic jacks, lifting systems or similar) can be dangerous for the operator.
Cembre S.p.A. does not accept any liability arising from the use of its hydraulics pumps
for applications diff erent from those listed in its catalogues or other documentation.
PORTABLE ELECTRO-HYDRAULIC PUMP
B70M-P24
B70M-P24-KV
bar (psi):
litres/min (gpm):
kg (lbs):
Volt DC:
°C (°F):
Volt / Hz: 220 - 240 / 50 - 60
3
cm (gal.):
mm (inch.):
is equal to ........................................................................................................................ 63,9 dB (A)
is ....................................................................................................................................< 130 dB (C)
B70M-P24A
B70M-P24A-KV
700 (10,000)
0,6 (0.16)
9,2 (20.2)
IP 54
24
-10 to +50 (+14 to +122)
24 Volt NiMH
120 / 50 - 60
1000 (0.26)
AGIP ARNICA 22 or equivalent
TOTAL DIEKAN 1640 or equivalent
390x163x323 (15.3x6.4x12.7)
and pressure switch; MPC1 gauge, is available
ure switch.
WA
B85M-P24
850 (12,150)
0,5 (0.13)
10 (22)
220 - 240 / 50 - 60
4