General Characteristics - Cembre CPE-1 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

– When electrical equipment is used, basic safety precautions must be followed to reduce fire danger,
electric shock and personal injury.
– Ensure the ON-OFF switch is in "0" position (off) before connecting the pump to the mains supply.
– The operator should concentrate on the work being performed and be careful to maintained a
balanced working position.

1. GENERAL CHARACTERISTICS

PUMP TYPE:
Max. operating pressure
Oil supply
Single-phase electric motor:
supply voltage
current
Power
Control circuits
Oil reservoir capacity
Weight
Dimensions:
Ingress protection:
Recommended oil:
Remote hand controller:
Remote pedal controller:
Safety: The pump is fitted with a maximum pressure valve and pressure switch; MPC1 gauge (see page 38) is
available as an optional accessory to check the correct setting of the pressure switch.
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent A
at the work place L
pA
– The maximum value of the weighted acoustic displacement pressure C
at the work place L
pCPeak
– The acoustic power level emitted by the machine L
is equal to .......................................................................................................................................................................... 88 dB (A)
5
ELECTRO-HYDRAULIC PUMP
CPE-1
bar (psi):
litres/min (gpm):
Volt/Hz:
230 ~ / 50-60
4,8 (50 Hz)
Ampere:
4,6 (60 Hz)
Watt (HP):
Volt:
litres (gal.US):
kg (lbs):
mm (inches):
is equal to ............................................................................................................................... 73 dB (A)
is ......................................................................................................................................< 130 dB (C)
WARNING!
CPE-1-110
700 (10,000)
110-115 ~ / 50-60
9,6 (50 Hz)
9,2 (60 Hz)
372 x 223 x 482 (14.6 x 8.8 x 19)
AGIP ARNICA 22 or ESSO INVAROL EP 22 or equivalent
×
WA
CPE-1-MG
CPE-1-110-MG
500 (7,250)
0,8 (0.21)
230 ~ / 50-60 [CPE-1-MG]
110-115 ~ / 50-60 [CPE-1-110-MG]
9,6 [CPE-1-MG]
9,2 [CPE-1-110-MG]
1050 (1.4)
24 DC
2,0 (0.52)
21 (46)
IP 55
×
ENGLISH

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cpe-1-110Cpe-1-mgCpe-1-110-mg

Table des Matières