General Characteristics - Cembre CPP-0 Notice D'utilisation Et Entretien

WARNING:
The hydraulic pumps have been developed to be used with crimping or cutting heads. According
to this specific use, they do not need and they are not equipped with a safe oil non-return system.
For this reason, their use different from the application to which they have been devoted (for
example the supply of hydraulic jacks, of lifting systems or similar) can be dangerous for the
operator.
CEMBRE does not accept any liability arising from the use of our pumps for applications different
from those listed in our catalogue or other information document.

1. GENERAL CHARACTERISTICS

– Inlet air pressure: ............................................................................................................. 5 ÷ 8 bar (73 - 115 psi)
– Operating pressure (*): ................................................................................................. 700 bar (10,000 psi)
– Dimensions: length (A) ................................................................................................. 320 mm (12.6 in.)
width (B) ................................................................................................... 150 mm (5.9 in.)
height (C) ................................................................................................. 200 mm (7.9 in.)
– Weight ................................................................................................................................ 6,8 kg
– High pressure flexible hose: length ......................................................................... 2 m
– Oil reservoir capacity: .................................................................................................... 1400 cm
– Recommended oil: .............................................................. ENI ISO ARNICA 32 or
– Coupler: the pump is delivered complete with a high pressure flexible hose, with "self-lock" female
quick coupler; suitable for connection to a CEMBRE hydraulic crimping or cutting heads
(see Fig. 2).
– Safety: the pump is provided with max pressure valve; MPC1 special manometer, is available
upon request to check the proper setting of the valve.
Acoustic noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
– The acoustic power level emitted by the machine
L is equal to ........................................................................................................................................... 83,7 dB (A)
WA
3
AIR-HYDRAULIC PUMP
TYPE CPP-0
(Ref. to Fig. 1)
is equal to .................................................................................................... 70,0 dB (A)
pA
is ............................................................................................< 130 dB (C)
pCPeak
SHELL TELLUS OIL TX 32 or equivalent
ENGLISH
(15 lbs)
(6.5 ft)
(1.3 gal)
3