Residual Risks - Ravelli Calliope EU Manuel D'utilisation Et D'entretien

Rev.0 05/05/20
Page 47
It is forbidden to make unauthorised changes to the stove.
Stove installation, system verification, operation verification
and initial calibration must be carried out exclusively by qualified
and authorised staff.
The stove needs to be connected to a single chimney that
guarantees the draught declared by the Manufacturer and
observes the installation regulations that apply to the installation
site.
The room where the stove is installed must have an air intake.
Before using the stove it is necessary to know the position and
function of the controls.
If the chimney catches fire you must call the fire brigade.
Only use original spare parts. Any tampering and/or
replacements that have not been authorised by Ravelli can
pose a danger to the user's safety.

Residual risks

The stove was designed so as to guarantee the user's essential
safety requirements.
Safety was integrated into the stove's design and construction as
much as possible.
For every residual risk there is a description of the risk and the zone
or part that is applies to (unless the risk applies to the entire stove
overall). Procedure-related information is also provided on how to
avoid the risk and on the correct use of the personal protective
equipment required by and made compulsory by the Manufacturer.
r e s i d u a l description procedure-related information
risk
Risk of When the stove is running, it may reach high
burns temperatures to the touch, especially on its external
surfaces. Take care to avoid burns and use the specific
tools if necessary.
Use the supplied glove to open the door for loading
operations and to adjust the primary air flow.
Use and maintenance manual Calliope EU