If Your Fryer Does Not Work Properly - T-Fal Ultimate EZ Clean Guide De L'utilisateur

• For the solid shortening (not recommended),
remove the lid from the container. Turn the
container over and press it to loosen the
shortening. Cut it into pieces and melt it in a
separate pan. Then, pour it into the bowl.
• Insert the empty container in the fryer, with its lid
and cap. Place the Oil box control button on the
Fry position.
• The lid, bowl, housing, frying basket and the Oil
box are dishwasher safe.
unit separately with a sponge.

If your fryer does not work properly

Problems and possible causes
The appliance is not plugged in.
The Reset function is activated
(overheating security).
The MAX marker for filling the bowl
has been exceeded.
The MAX marker for filling the frying
basket been exceeded.
Food is wet or contains too much
water (frozen food).
Different types of oil/shortening have
been mixed.
Fig. 6. Clean the control
The fryer is not heating
Plug in the appliance.
Press the "reset" button, which is
located at the back of the fryer. If
the problem persits, please contact
our Consumer Service Department.
The frying oil overflows
Check the oil level (MAX), and
remove the excess.
Check the MAX level of the frying
basket, and has remove the excess.
Remove any ice and dry the food
thoroughly.
Lower the basket slowly.
Empty and clean the bowl. Refill the
bowl with one type of oil.
Before filling the
fryer bowl, always
check to ensure
the filtration valve
has been reset to
its original
position; if not,
check that its
metal housing has
not been damaged
in any way.
Solutions
EN
25