Yamaha Big Bear YFM400FPS Manuel Du Propriétaire page 268

1. Engine oil filter element cover bolt (× 3)
2. Oil filter element cover
1. Boulon de couvercle de l'élément de filtre à huile moteur (× 3)
2. Couvercle de l'élément de filtre à huile
1. Perno de la tapa del elemento del filtro de aceite de motor (× 3)
2. Tapa del elemento del filtro de aceite
1. Engine oil filter element
1. Élément du filtre à huile moteur
1. Element del filtro de aceite de motor
2. O-ring (× 2)
2. Joint torique (× 2)
2. Junta tórica (× 2)
8-17
6. Remove the shift pedal by removing the bolt.
7. Remove the oil filter element cover, and then
the oil filter element.
8. Clean the oil strainer and oil filter element
with solvent.
9. Inspect the O-ring and replace it if damaged.
10. Install the oil filter element, O-ring, oil filter el-
ement cover, compression spring, oil strainer
and drain bolt. Tighten the drain bolt to the
specified torque.
CAUTION:
_
Before installing the drain bolt, be sure to in-
stall the O-ring, compression spring and oil
strainer.
_
Tightening torque
Drain bolt (engine):
32 Nm (3.2 m·kgf)
Oil filter element cover bolt:
10 Nm (1.0 m·kgf)