Auxiliary Dc Jack - Yamaha Big Bear YFM400FPS Manuel Du Propriétaire

1. Auxiliary DC jack

1. Prise pour accessoires
1. Toma de CC auxiliar
2. Cap
2. Capuchon
2. Tapa
Auxiliary DC jack
The auxiliary DC jack is located at the front right
side of the ATV. The auxiliary DC jack can be used
for suitable work lights, radios, etc. The auxiliary
DC jack should only be used when the engine is
running.
1. Set the light switch to "OFF".
2. Start the engine. (See pages 6-3–6-9.)
3. Open the auxiliary DC jack cap, and then in-
sert the accessory power plug into the jack.
Maximum rated capacity for the auxiliary
DC jack:
DC 12 V, 120 W (10 A)
4. When the auxiliary DC jack is not being used,
cover it with the cap.
4-43
EBU01002