Festo DGEA YSR Série Notice D'utilisation page 10

DGEA−...−YSR
2 Method of operation and use
The DGEA−...−YSR has been designed for fastening shock absorbers on the canti
lever axis type DGEA−... in the area of the stroke reserve.
It is not intended as a fixed stop in the positioning range of the cantilever axis.
3 Conditions of use
When fitting to cantilever axes which are already set:
Check whether a speed limitation or a mass modification to the DGEA−... is
S
necessary.
The use of the shock absorber causes an additional torque on the cantilever
arm.
The DGEA−... can only be operated reliably (see also the technical specifica
tions for the shock absorber) if the maximum loading limits are not exceeded.
4 Fitting
1. Position the cantilever arm in a mechan
ical end position (W).
2. Push the cantilever arm out of the end
position by the dimension Y.
DGEA−...
18
25
40
10
Dimension Y [mm]
Shock absorber stroke
+ 13.5 mm
Shock absorber stroke
+ 2 mm
Shock absorber stroke
+ 2 mm
(w)
y
Fig. 2
Festo DGEA−...−YSR 0707a English
(w)