Operating Modes - Renkforce ZD1406 Notice D'emploi

d) Operating modes
There are two operating modes available: "Menu mode" and "Manual mode".
You can scroll through the values quickly by holding down the
Menu mode:
The fryer comes with 6 preset cooking modes that are printed on the touchscreen (6):
"Bread", "Beef", "Shrimps",
"Pizza", "Chicken" and "Chips".
1. (Make sure that you turn on the fryer first using the
2. Select a cooking mode using the MENU button (I). Keep pressing the MENU button to scroll through
the cooking modes.
- The selected cooking mode will flash on the display.
- The temperature and frying time for the selected cooking mode will be shown alternately on the
display.
3. You can also adjust a cooking mode to suit your requirements. Press the
editing mode. The minute value flashes.
3.1. Adjust the minute value using the
3.2. Press the
3.3. Press the
3.4. Save the settings by pressing the
- Important: User-defined settings will not be saved for future use.
4. Press the START/STOP to start the frying process.
- The remaining time will be shown on the display.
- The symbol indicates that the fryer is heating up.
Manual mode:
In manual mode you can set the temperature and frying time yourself. Use this mode when cooking food for
which there is no cooking mode (see "Menu mode").
Temperature: min. 65 to max. 200°C
Frying time: max. 60 min
1. (Make sure that you turn on the fryer first using the
2. Press the button. The minute value flashes.
3. Adjust the minute value using the
4. Press the button to change to the second value. Set the second value.
5. Press the button to change to the temperature setting. Set the desired temperature.
6. Save the settings by pressing the
7. Press the START/STOP to start the frying process.
button to change to the second value. Set the second value.
button to change to the temperature setting. Set the desired temperature.
and
button.
button.)
and buttons.
button.
button.)
buttons.
(E) and (H) arrows.
button to access the
29