Valor L1 Serie Instructions D'installation page 3

6. Lower the bottom hinge pin into the bottom hole.
7. Repeat for the right-hand door.
8. Install the barrier screen.
a. Rest the inboard bottom tabs on the plinth.
b. Push the screen against the trim so the magnets
contact the trim.
b
a
a
Repair Parts List
Description
1 LH door assembly
2 RH door assembly
3 Plinth
4 Trim frame
5 Barrier screen
#8 x 3/8 black screws
Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.
Designed and Manufactured by / for Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valorfi replaces.com
Maintenance
To clean the fireplace trim, use mild soap and water.
To clean the barrier screen, dust with a soft brush.
If the barrier becomes damaged, the barrier shall
be replaced with the manufacturer's barrier for this
b
appliance.
To clean the window and ceramics inside the firebox,
see the Homeowner's Manual supplied with the fireplace.
a
Part Number
4002957AZ
4002959AZ
4004599AZ
4005611AZ
4005564
100A757
WARNING
DO NOT TOUCH THE BARRIER SCREEN OR
FIREPLACE WHILE THEY ARE HOT! Let the
fireplace cool first before cleaning it.
FOR SAFETY PURPOSE, ensure the barrier
screen is re-installed on the fireplace front
after maintenance if it has been removed.
4
1
2
3
5
3