Sony MDS-PC2 Mode D'emploi page 21

z
You can copy CD-TEXT information automatically during CD
Synchro-recording
By connecting the CONTROL A1
player using a monaural mini-plug cord (2-pin) (not supplied),
you can copy track names automatically during CD Synchro-
recording. As a track is recorded, the track name scrolls in the
display.
z
You can also perform synchro-recording with a Sony video
CD player
By reprogramming the MD deck's remote, you can use the
procedure below to perform Synchro-recording with a Sony
video CD player.
Press number button 2 while pressing down ?/1 on the MD
deck's remote. You can now operate the MD deck and the video
CD player with the remote. To control the CD player again, press
number button 1 while pressing down ?/1 on the MD deck's
remote.
Notes
• Automatic copying of track names in CD-TEXT information
can't be done if you record over existing tracks on an MD.
• When performing CD Synchro-recording with a CD player
with a mode selector, be sure to set the selector to CD1.
• When you record tracks from certain CD or multi-disc players,
the entire material may be recorded as a single track.
jack on the deck to a Sony CD
21 GB