Dividing Tracks - Sony MDS-PC2 Mode D'emploi

Dividing Tracks

You can divide a recorded track at any point simply by
adding a track mark at that point. This is especially useful
when you want to divide recorded material which
contains multiple tracks but only one track number (see
page 18), or when you want to locate a certain point in the
track.
Example: Dividing the second track
AAA BBB
1 2
B1
AAA BBB
1 2 3
B1
When you divide a track, the total number of tracks
increases by one and all tracks following the divided track
are automatically renumbered.
1
While the deck is stopped, playing, or paused,
press MENU/NO.
"Edit Menu" appears in the display.
2
Press ./> repeatedly until "Divide ?" appears,
then press YES.
3
Press ./> repeatedly until the number of the
track you want to divide flashes, then press YES.
"-Rehearsal-" appears and the track starts to play.
4
While monitoring the sound, press ./>
repeatedly to locate the dividing point.
The time indication ("m," "s ," and "f ") of the current
point is displayed and several seconds of the track
from that point play back repeatedly.
To find a point quickly
Specify a unit (minute, second, or frame) by which the
MD is advanced when you press ./>
repeatedly.
To do this, press m/M in step 4 repeatedly to select
"m," "s," or "f." The selected unit flashes in the
display.
5
Repeat step 4 until you've located the dividing
point.
6
Press YES.
"Complete!!" appears for a few seconds and the track
is divided. The deck starts to play the newly created
track. Note that new track has no name.
To cancel the operation
Press MENU/NO or x.
32 GB
CCC
3
B2
CCC
4
B2
z
You can undo the track division
For details, see "Undoing the Last Edit" on page 37.
z
You can divide tracks while recording
For details, see "Marking Track Numbers While Recording" on
page 18.