Publicité
Materials for wash connection:
• Wash nozzle with gasket
• Clamps (2 pcs)
• Check valve
• Adapter and gasket
• PTFE tape
• 9/16 in wrench
• Plug with gasket, and clamp (Optional)
Follow these instructions to install the refractometer with a flow cell. Notice that the images in
this instruction may differ from the flow cell you have for your process.
1. Make sure the process line is depressurized.
2. Weld ferrules into the process pipeline according to material and system requirements.
Table 4 Flow cell installation dimension
Flow cells
1"
A (mm [in])
52.5 [2.0] 72.2 [2.8]
16
A
1 ½"
2"
91.0 [3.5]
/
a2
2 ½"
3"
110.2 [4.3]
128.3 [5.0]
4"
169.6 [6.6]
M212866EN-D
Publicité
